Teledyne FLIR BFS-PGE-16S7C-C
FLIR BFS-PGE-16S7C-C 1.76 MP, 69 FPS, Sony IMX432, Color
FLIR BFS-PGE-16S7C-C Data Sheet
- Part Number
- BFS-PGE-16S7C-C
- Resolution
- 1600 x 1100
- Megapixels
- 1.76
- Max Frame Rate Standard
- 69
- Sensor Model
- Sony IMX432
- Pixel Size
- 9
- Sensor Type
- CMOS
- Sensor Format
- 1.1"
- Shutter type
- Global shutter
- Spectrum
- Color
- Optical Filter
- IR-Cut Off (670 nm)
- Lens Mount
- C-mount
- Synchronization
- Software trigger, hardware trigger, action command, PTP
- Data Interface
- Gigabit Ethernet 1 Gbps
Features
- Acquisition Modes
- Continuous / Single Frame / Multi Frame
- Exposure Control
- Hardware trigger, programmable via camera API, automatic
- Exposure Range
- 14 µs to 30 seconds
- Flash Memory
- 6 MB non-volatile memory
- Gain Control
- Manual, automatic (AGC)
- Image Buffer
- 240 MB
- Image Processing
- Color correction matrix, gamma, lookup table, saturation, and sharpness
- Partial Image Modes
- Pixel binning, decimation, ROI
- User Sets
- 2 user configuration sets for custom camera settings
- White Balance
- Manual, automatic (AWB)
Performance
- Absolute Sensitivity Threshold (y)
- 8.22 (HCG) / 38.46 (LCG)
- Dynamic Range dB
- 71.43 (HCG) / 72.39 (LCG)
- Gain Range
- 0 dB to 48 dB
- QE Blue
- 54 (HCG) / 53 (LCG) @460 nm
- QE Green
- 64 (HCG) / 63 (LCG) @525 nm
- QE Red
- 52 (HCG) / 51 (LCG) @625 nm
- Saturation Capacity (e-)
- 19621 (HCG) / 100439 (LCG)
- Temporal Dark Noise (Read Noise)
- 4.76 (HCG) / 23.61 (LCG)
Physical
- Auxiliary Output
- 3.3 V, 120 mA maximum
- Connector
- RJ45 (horizontal locking) | Hirose HR10A-7R-6PB
- Digitization Bit Depth (ADC)
- 12-bit
- Dimensions [W x H x L]
- 29 mm × 29 mm × 39 mm
- Mass
- 53 g
- Non-Isolated I/O Ports
- 1 bi-directional, 1 input
- Operating Humidity
- 20 to 80% (no condensation)
- Operating Temperature
- 0° to 50°C (ambient)
- Opto-isolated I/O Ports
- 1 input, 1 output
- Power Consumption [Maximum]
- 4.2 W
- Power Requirements
- Power over Ethernet (PoE), or 12 V nominal (8 - 24 V) via GPIO
- Serial Port
- Supported
- Storage Humidity
- 30 to 95% (no condensation)
- Storage Temperature
- -30° to 60°C
Recommended System Configuration
- Port
- Gigabit Ethernet Port
- Power Sourcing Equipment
- IEEE802.3af-2003 PoE Interface Card / Injector/ Switch or Camera Power Supply (12 V 1.5 A, 6–pin Hirose)
- Required Accessories
- Lens, Cable, Host Adapter (GigE)
Compliance & Certifications
- Compliance
- CE, FCC, KCC, RoHS. The ECCN for this product is: EAR099.
- Machine Vision Standard
- GigE Vision v1.2
- Warranty
- 3 years
FLIR BFS-PGE-16S7C-C 1.76 MP, 69 FPS, Sony IMX432, Color
FLIR BFS-PGE-16S7C-C Data Sheet
- Part Number
- BFS-PGE-16S7C-C
- Resolution
- 1600 x 1100
- Megapixels
- 1.76
- Max Frame Rate Standard
- 69
- Sensor Model
- Sony IMX432
- Pixel Size
- 9
- Sensor Type
- CMOS
- Sensor Format
- 1.1"
- Shutter type
- Global shutter
- Spectrum
- Color
- Optical Filter
- IR-Cut Off (670 nm)
- Lens Mount
- C-mount
- Synchronization
- Software trigger, hardware trigger, action command, PTP
- Data Interface
- Gigabit Ethernet 1 Gbps
Features
- Acquisition Modes
- Continuous / Single Frame / Multi Frame
- Exposure Control
- Hardware trigger, programmable via camera API, automatic
- Exposure Range
- 14 µs to 30 seconds
- Flash Memory
- 6 MB non-volatile memory
- Gain Control
- Manual, automatic (AGC)
- Image Buffer
- 240 MB
- Image Processing
- Color correction matrix, gamma, lookup table, saturation, and sharpness
- Partial Image Modes
- Pixel binning, decimation, ROI
- User Sets
- 2 user configuration sets for custom camera settings
- White Balance
- Manual, automatic (AWB)
Performance
- Absolute Sensitivity Threshold (y)
- 8.22 (HCG) / 38.46 (LCG)
- Dynamic Range dB
- 71.43 (HCG) / 72.39 (LCG)
- Gain Range
- 0 dB to 48 dB
- QE Blue
- 54 (HCG) / 53 (LCG) @460 nm
- QE Green
- 64 (HCG) / 63 (LCG) @525 nm
- QE Red
- 52 (HCG) / 51 (LCG) @625 nm
- Saturation Capacity (e-)
- 19621 (HCG) / 100439 (LCG)
- Temporal Dark Noise (Read Noise)
- 4.76 (HCG) / 23.61 (LCG)
Physical
- Auxiliary Output
- 3.3 V, 120 mA maximum
- Connector
- RJ45 (horizontal locking) | Hirose HR10A-7R-6PB
- Digitization Bit Depth (ADC)
- 12-bit
- Dimensions [W x H x L]
- 29 mm × 29 mm × 39 mm
- Mass
- 53 g
- Non-Isolated I/O Ports
- 1 bi-directional, 1 input
- Operating Humidity
- 20 to 80% (no condensation)
- Operating Temperature
- 0° to 50°C (ambient)
- Opto-isolated I/O Ports
- 1 input, 1 output
- Power Consumption [Maximum]
- 4.2 W
- Power Requirements
- Power over Ethernet (PoE), or 12 V nominal (8 - 24 V) via GPIO
- Serial Port
- Supported
- Storage Humidity
- 30 to 95% (no condensation)
- Storage Temperature
- -30° to 60°C
Recommended System Configuration
- Port
- Gigabit Ethernet Port
- Power Sourcing Equipment
- IEEE802.3af-2003 PoE Interface Card / Injector/ Switch or Camera Power Supply (12 V 1.5 A, 6–pin Hirose)
- Required Accessories
- Lens, Cable, Host Adapter (GigE)
Compliance & Certifications
- Compliance
- CE, FCC, KCC, RoHS. The ECCN for this product is: EAR099.
- Machine Vision Standard
- GigE Vision v1.2
- Warranty
- 3 years
| Vendor: | |
|---|---|
| SKU: |
BFS-PGE-16S7C-C |
| Weight: |
1.0 lb |
Lead time varies by product. Standard non-back-order items ship within 1-7 days. Items in stock at our Sacramento warehouse ship same day. Back-ordered item lead times vary and are based on current production backlogs and existing open orders. After receipt of order you will be contacted with a shipping timeline.