Teledyne FLIR BFS-PGE-200S6C-C
FLIR BFS-PGE-200S6C-C 20 MP, 6.1 FPS, Sony IMX183, Color
Customization services offered; sensor glass removal, filter installation, custom housing, etc. Inquire for more information.
FLIR BFS-PGE-200S6C-C Data Sheet>>
- Part Number
- BFS-PGE-200S6C-C
- Resolution
- 5472 × 3648
- Frame Rate
- 6.1
- Frame Rate [Lossless Compression Enabled]
- 5
- Megapixels
- 20
- Chroma
- Color
- Sensor Name
- Sony IMX183
- Sensor Type
- CMOS
- Sensor Format
- 1"
- Readout Method
- Rolling shutter with global reset
- Pixel Size
- 2.4
- Lens Mount
- C-mount
- ADC
- 10-bit, 12-bit
- Required Accessories
- Lens, Cable, Host Adapter (GigE), Tripod Mount Adapter (ACC-01-0003)
Features
- Acquisition Modes
- Continuous Single Frame Multi Frame
- Exposure Range
- 44 µs to 30 seconds
- Flash Memory
- 6 MB non-volatile memory
- Frame Rate
- 6.1
- Frame Rate [Lossless Compression Enabled]
- 5
- Gain Range
- 0 dB to 27 dB
- Image Buffer
- 240 MB
- Image Processing
- Color correction matri×, gamma, lookup table, saturation, and sharpness
- Partial Image Modes
- Pixel binning, decimation, ROI
- User Sets
- 2 user configuration sets for custom camera settings
Performance
- Absolute Sensitivity Threshold (y)
- 5.83
- Dynamic Range dB
- 71.89
- Quantum Efficiency Blue
- 59.69 (460nm)
- Quantum Efficiency Green
- 65.39 (530nm)
- Quantum Efficiency Red
- 41.01 (625nm)
- Saturation Capacity (e-)
- 14978
- Temporal Dark Noise (e-)
- 3.31
Physical
- ADC
- 10-bit, 12-bit
- Auxiliary Output
- 3.3 V, 120 mA maximum
- Chroma
- Color
- Dimensions [W x H x L]
- 29 mm × 29 mm × 30 mm
- Interface
- GigE PoE
- Lens Mount
- C-mount
- Mass
- 36 grams
- Megapixels
- 20
- Non-isolated I/O Ports
- 1 bi-directional, 1 input
- Operating Humidity
- 20 to 80% (no condensation)
- Operating Temperature
- 0° to 50°C
- Opto-isolated I/O Ports
- 1 input, 1 output
- Part Number
- BFS-PGE-200S6C-C
- Pixel Size
- 2.4
- Power Consumption [Maximum]
- <2.5 W
- Power Requirements
- Power over Ethernet (PoE), or 12 V nominal (8 - 24 V) via GPIO
- Readout Method
- Rolling shutter with global reset
- Resolution
- 5472 × 3648
- Sensor Format
- 1"
- Sensor Name
- Sony IMX183
- Sensor Type
- CMOS
- Storage Humidity
- 30 to 95% (no condensation)
- Storage Temperature
- -30° to 60°C
Recommended System Configuration
- CPU
- 3.1 GHz or equivalent CPU
- Hard Drive
- 200 MB hard drive space
- Operating System
- Windows or Linux (32–bit or 64–bit)
- Port
- Gigabit Ethernet Port
- Power Sourcing Equipment
- IEEE802.3af-2003 PoE Interface Card / Injector/ Switch or Camera Power Supply (12 V 1.5 A, 6–pin Hirose)
- RAM
- 2 GB RAM or more
- Required Accessories
- Lens, Cable, Host Adapter (GigE), Tripod Mount Adapter (ACC-01-0003)
Categoría:
FLIR BFS-PGE-200S6C-C 20 MP, 6.1 FPS, Sony IMX183, Color
Customization services offered; sensor glass removal, filter installation, custom housing, etc. Inquire for more information.
FLIR BFS-PGE-200S6C-C Data Sheet>>
- Part Number
- BFS-PGE-200S6C-C
- Resolution
- 5472 × 3648
- Frame Rate
- 6.1
- Frame Rate [Lossless Compression Enabled]
- 5
- Megapixels
- 20
- Chroma
- Color
- Sensor Name
- Sony IMX183
- Sensor Type
- CMOS
- Sensor Format
- 1"
- Readout Method
- Rolling shutter with global reset
- Pixel Size
- 2.4
- Lens Mount
- C-mount
- ADC
- 10-bit, 12-bit
- Required Accessories
- Lens, Cable, Host Adapter (GigE), Tripod Mount Adapter (ACC-01-0003)
Features
- Acquisition Modes
- Continuous Single Frame Multi Frame
- Exposure Range
- 44 µs to 30 seconds
- Flash Memory
- 6 MB non-volatile memory
- Frame Rate
- 6.1
- Frame Rate [Lossless Compression Enabled]
- 5
- Gain Range
- 0 dB to 27 dB
- Image Buffer
- 240 MB
- Image Processing
- Color correction matri×, gamma, lookup table, saturation, and sharpness
- Partial Image Modes
- Pixel binning, decimation, ROI
- User Sets
- 2 user configuration sets for custom camera settings
Performance
- Absolute Sensitivity Threshold (y)
- 5.83
- Dynamic Range dB
- 71.89
- Quantum Efficiency Blue
- 59.69 (460nm)
- Quantum Efficiency Green
- 65.39 (530nm)
- Quantum Efficiency Red
- 41.01 (625nm)
- Saturation Capacity (e-)
- 14978
- Temporal Dark Noise (e-)
- 3.31
Physical
- ADC
- 10-bit, 12-bit
- Auxiliary Output
- 3.3 V, 120 mA maximum
- Chroma
- Color
- Dimensions [W x H x L]
- 29 mm × 29 mm × 30 mm
- Interface
- GigE PoE
- Lens Mount
- C-mount
- Mass
- 36 grams
- Megapixels
- 20
- Non-isolated I/O Ports
- 1 bi-directional, 1 input
- Operating Humidity
- 20 to 80% (no condensation)
- Operating Temperature
- 0° to 50°C
- Opto-isolated I/O Ports
- 1 input, 1 output
- Part Number
- BFS-PGE-200S6C-C
- Pixel Size
- 2.4
- Power Consumption [Maximum]
- <2.5 W
- Power Requirements
- Power over Ethernet (PoE), or 12 V nominal (8 - 24 V) via GPIO
- Readout Method
- Rolling shutter with global reset
- Resolution
- 5472 × 3648
- Sensor Format
- 1"
- Sensor Name
- Sony IMX183
- Sensor Type
- CMOS
- Storage Humidity
- 30 to 95% (no condensation)
- Storage Temperature
- -30° to 60°C
Recommended System Configuration
- CPU
- 3.1 GHz or equivalent CPU
- Hard Drive
- 200 MB hard drive space
- Operating System
- Windows or Linux (32–bit or 64–bit)
- Port
- Gigabit Ethernet Port
- Power Sourcing Equipment
- IEEE802.3af-2003 PoE Interface Card / Injector/ Switch or Camera Power Supply (12 V 1.5 A, 6–pin Hirose)
- RAM
- 2 GB RAM or more
- Required Accessories
- Lens, Cable, Host Adapter (GigE), Tripod Mount Adapter (ACC-01-0003)
| Vendedor: | |
|---|---|
| SKU: |
BFS-PGE-200S6C-C |
| Peso: |
1.0 lb |
Lead time varies by product. Standard non-back-order items ship within 1-7 days. Items in stock at our Sacramento warehouse ship same day. Back-ordered item lead times vary and are based on current production backlogs and existing open orders. After receipt of order you will be contacted with a shipping timeline.