Teledyne FLIR BFS-PGE-200S6M-C

Teledyne Flir
|
BFS-PGE-200S6M-C
$586.00 $699.00( / )
Shipping calculated at checkout.

FLIR BFS-PGE-200S6M-C 20 MP, 6.1 FPS, Sony IMX183, Monochrome

Customization services offered; sensor glass removal, filter installation, custom housing, etc. Inquire for more information.

 

FLIR BFS-PGE-200S6M-C Data Sheet>>

Part Number
BFS-PGE-200S6M-C
Resolution
5472 × 3648
Frame Rate
6.1
Frame Rate [Lossless Compression Enabled]
5
Megapixels
20
Chroma
Mono
Sensor Name
Sony IMX183
Sensor Type
CMOS
Sensor Format
1"
Readout Method
Rolling shutter with global reset
Pixel Size
2.4
Lens Mount
C-mount
ADC
10-bit, 12-bit
Required Accessories
Lens, Cable, Host Adapter (GigE), Tripod Mount Adapter (ACC-01-0003)
Features
Acquisition Modes
Continuous Single Frame Multi Frame
Exposure Range
44 µs to 30 seconds
Flash Memory
6 MB non-volatile memory
Frame Rate
6.1
Frame Rate [Lossless Compression Enabled]
5
Gain Range
0 dB to 27 dB
Image Buffer
240 MB
Image Processing
Gamma, lookup table, and sharpness
Partial Image Modes
Pixel binning, decimation, ROI
User Sets
2 user configuration sets for custom camera settings
Performance
Absolute Sensitivity Threshold (y)
4.97
Dynamic Range dB
71.89
Quantum Efficiency
75.73 (530nm)
Saturation Capacity (e-)
14794
Temporal Dark Noise (e-)
3.26
Physical
ADC
10-bit, 12-bit
Auxiliary Output
3.3 V, 120 mA maximum
Chroma
Mono
Dimensions [W x H x L]
29 mm × 29 mm × 30 mm
Interface
GigE PoE
Lens Mount
C-mount
Mass
36 grams
Megapixels
20
Non-isolated I/O Ports
1 bi-directional, 1 input
Operating Humidity
20 to 80% (no condensation)
Operating Temperature
0° to 50°C
Opto-isolated I/O Ports
1 input, 1 output
Part Number
BFS-PGE-200S6M-C
Pixel Size
2.4
Power Consumption [Maximum]
<2.5 W
Power Requirements
Power over Ethernet (PoE), or 12 V nominal (8 - 24 V) via GPIO
Readout Method
Rolling shutter with global reset
Resolution
5472 × 3648
Sensor Format
1"
Sensor Name
Sony IMX183
Sensor Type
CMOS
Storage Humidity
30 to 95% (no condensation)
Storage Temperature
-30° to 60°C
Recommended System Configuration
CPU
3.1 GHz or equivalent CPU
Hard Drive
200 MB hard drive space
Operating System
Windows or Linux (32–bit or 64–bit)
Port
Gigabit Ethernet Port
Power Sourcing Equipment
IEEE802.3af-2003 PoE Interface Card / Injector/ Switch or Camera Power Supply (12 V 1.5 A, 6–pin Hirose)
RAM
2 GB RAM or more
Required Accessories
Lens, Cable, Host Adapter (GigE), Tripod Mount Adapter (ACC-01-0003)

FLIR BFS-PGE-200S6M-C 20 MP, 6.1 FPS, Sony IMX183, Monochrome

Customization services offered; sensor glass removal, filter installation, custom housing, etc. Inquire for more information.

 

FLIR BFS-PGE-200S6M-C Data Sheet>>

Part Number
BFS-PGE-200S6M-C
Resolution
5472 × 3648
Frame Rate
6.1
Frame Rate [Lossless Compression Enabled]
5
Megapixels
20
Chroma
Mono
Sensor Name
Sony IMX183
Sensor Type
CMOS
Sensor Format
1"
Readout Method
Rolling shutter with global reset
Pixel Size
2.4
Lens Mount
C-mount
ADC
10-bit, 12-bit
Required Accessories
Lens, Cable, Host Adapter (GigE), Tripod Mount Adapter (ACC-01-0003)
Features
Acquisition Modes
Continuous Single Frame Multi Frame
Exposure Range
44 µs to 30 seconds
Flash Memory
6 MB non-volatile memory
Frame Rate
6.1
Frame Rate [Lossless Compression Enabled]
5
Gain Range
0 dB to 27 dB
Image Buffer
240 MB
Image Processing
Gamma, lookup table, and sharpness
Partial Image Modes
Pixel binning, decimation, ROI
User Sets
2 user configuration sets for custom camera settings
Performance
Absolute Sensitivity Threshold (y)
4.97
Dynamic Range dB
71.89
Quantum Efficiency
75.73 (530nm)
Saturation Capacity (e-)
14794
Temporal Dark Noise (e-)
3.26
Physical
ADC
10-bit, 12-bit
Auxiliary Output
3.3 V, 120 mA maximum
Chroma
Mono
Dimensions [W x H x L]
29 mm × 29 mm × 30 mm
Interface
GigE PoE
Lens Mount
C-mount
Mass
36 grams
Megapixels
20
Non-isolated I/O Ports
1 bi-directional, 1 input
Operating Humidity
20 to 80% (no condensation)
Operating Temperature
0° to 50°C
Opto-isolated I/O Ports
1 input, 1 output
Part Number
BFS-PGE-200S6M-C
Pixel Size
2.4
Power Consumption [Maximum]
<2.5 W
Power Requirements
Power over Ethernet (PoE), or 12 V nominal (8 - 24 V) via GPIO
Readout Method
Rolling shutter with global reset
Resolution
5472 × 3648
Sensor Format
1"
Sensor Name
Sony IMX183
Sensor Type
CMOS
Storage Humidity
30 to 95% (no condensation)
Storage Temperature
-30° to 60°C
Recommended System Configuration
CPU
3.1 GHz or equivalent CPU
Hard Drive
200 MB hard drive space
Operating System
Windows or Linux (32–bit or 64–bit)
Port
Gigabit Ethernet Port
Power Sourcing Equipment
IEEE802.3af-2003 PoE Interface Card / Injector/ Switch or Camera Power Supply (12 V 1.5 A, 6–pin Hirose)
RAM
2 GB RAM or more
Required Accessories
Lens, Cable, Host Adapter (GigE), Tripod Mount Adapter (ACC-01-0003)

Vendedor: 

Teledyne Flir

SKU: 

BFS-PGE-200S6M-C

Peso: 

1.0 lb

Lead time varies by product. Standard non-back-order items ship within 1-7 days. Items in stock at our Sacramento warehouse ship same day. Back-ordered item lead times vary and are based on current production backlogs and existing open orders. After receipt of order you will be contacted with a shipping timeline.

*Note, if order is resale or government tax exempt, contact us to place the order directly with our sales staff and provide your tax exemption form.


Note: We do ship internationally, shipping terms are INCO TERM EX WORKS. Customer is responsible for any applicable duties, taxes or fees that the destination country may apply.