Teledyne FLIR BFS-PGE-23S3C-C
Teledyne FLIR BFS-PGE-23S3C-C 2.3 MP, 53 FPS, Sony IMX392, Color
- Part Number
- BFS-PGE-23S3C-C
- Resolution
- 1920 x 1200
- Megapixels
- 2.3
- Max Frame Rate Standard
- 53
- Max Frame Rate Turbodrive/Lossless Compression
- 80
- Sensor Model
- Sony IMX392
- Pixel Size
- 3.45
- Sensor Type
- CMOS
- Sensor Format
- 1/2.3"
- Shutter type
- Global shutter
- Spectrum
- Color
- Optical Filter
- IR-Cut Off (670 nm)
- Lens Mount
- C-mount
- Synchronization
- Software trigger, hardware trigger, action command, PTP
- Data Interface
- Gigabit Ethernet 1 Gbps
Features
- Acquisition Modes
- Continuous / Single Frame / Multi Frame
- Exposure Control
- Hardware trigger, programmable via camera API, automatic
- Exposure Range
- 9 µs to 30 seconds
- Flash Memory
- 6 MB non-volatile memory
- Gain Control
- Manual, automatic (AGC)
- Image Buffer
- 240 MB
- Image Processing
- Color correction matrix, gamma, lookup table, saturation, and sharpness
- Partial Image Modes
- Pixel binning, decimation, ROI
- User Sets
- 2 user configuration sets for custom camera settings
- White Balance
- Manual, automatic (AWB)
Performance
- Absolute Sensitivity Threshold (y)
- 4.80
- Dynamic Range dB
- 71.82
- Gain Range
- 0 dB to 47 dB
- QE Blue
- 49.01 @470 nm
- QE Green
- 59.13 @525 nm
- QE Red
- 45.89 @630 nm
- Saturation Capacity (e-)
- 10987
- Temporal Dark Noise (Read Noise)
- 2.32
Physical
- Auxiliary Output
- 3.3 V, 120 mA maximum
- Connector
- RJ45 (horizontal locking) | Hirose HR10A-7R-6PB
- Digitization Bit Depth (ADC)
- 10-bit, 12-bit
- Dimensions [W x H x L]
- 29 mm × 29 mm × 30 mm
- Mass
- 36 g
- Non-Isolated I/O Ports
- 1 bi-directional, 1 input
- Operating Humidity
- 20 to 80% (no condensation)
- Operating Temperature
- 0° to 50°C (ambient)
- Opto-isolated I/O Ports
- 1 input, 1 output
- Power Consumption [Maximum]
- 3 W (2.8 W nominal)
- Power Requirements
- Power over Ethernet (PoE), or 12 V nominal (8 - 24 V) via GPIO
- Serial Port
- Supported
- Storage Humidity
- 30 to 95% (no condensation)
- Storage Temperature
- -30° to 60°C
Categoría:
Teledyne FLIR BFS-PGE-23S3C-C 2.3 MP, 53 FPS, Sony IMX392, Color
- Part Number
- BFS-PGE-23S3C-C
- Resolution
- 1920 x 1200
- Megapixels
- 2.3
- Max Frame Rate Standard
- 53
- Max Frame Rate Turbodrive/Lossless Compression
- 80
- Sensor Model
- Sony IMX392
- Pixel Size
- 3.45
- Sensor Type
- CMOS
- Sensor Format
- 1/2.3"
- Shutter type
- Global shutter
- Spectrum
- Color
- Optical Filter
- IR-Cut Off (670 nm)
- Lens Mount
- C-mount
- Synchronization
- Software trigger, hardware trigger, action command, PTP
- Data Interface
- Gigabit Ethernet 1 Gbps
Features
- Acquisition Modes
- Continuous / Single Frame / Multi Frame
- Exposure Control
- Hardware trigger, programmable via camera API, automatic
- Exposure Range
- 9 µs to 30 seconds
- Flash Memory
- 6 MB non-volatile memory
- Gain Control
- Manual, automatic (AGC)
- Image Buffer
- 240 MB
- Image Processing
- Color correction matrix, gamma, lookup table, saturation, and sharpness
- Partial Image Modes
- Pixel binning, decimation, ROI
- User Sets
- 2 user configuration sets for custom camera settings
- White Balance
- Manual, automatic (AWB)
Performance
- Absolute Sensitivity Threshold (y)
- 4.80
- Dynamic Range dB
- 71.82
- Gain Range
- 0 dB to 47 dB
- QE Blue
- 49.01 @470 nm
- QE Green
- 59.13 @525 nm
- QE Red
- 45.89 @630 nm
- Saturation Capacity (e-)
- 10987
- Temporal Dark Noise (Read Noise)
- 2.32
Physical
- Auxiliary Output
- 3.3 V, 120 mA maximum
- Connector
- RJ45 (horizontal locking) | Hirose HR10A-7R-6PB
- Digitization Bit Depth (ADC)
- 10-bit, 12-bit
- Dimensions [W x H x L]
- 29 mm × 29 mm × 30 mm
- Mass
- 36 g
- Non-Isolated I/O Ports
- 1 bi-directional, 1 input
- Operating Humidity
- 20 to 80% (no condensation)
- Operating Temperature
- 0° to 50°C (ambient)
- Opto-isolated I/O Ports
- 1 input, 1 output
- Power Consumption [Maximum]
- 3 W (2.8 W nominal)
- Power Requirements
- Power over Ethernet (PoE), or 12 V nominal (8 - 24 V) via GPIO
- Serial Port
- Supported
- Storage Humidity
- 30 to 95% (no condensation)
- Storage Temperature
- -30° to 60°C
| Tipo: | |
|---|---|
| Vendedor: | |
| SKU: |
BFS-PGE-23S3C-C |
| Peso: |
1.0 lb |
Lead time varies by product. Standard non-back-order items ship within 1-7 days. Items in stock at our Sacramento warehouse ship same day. Back-ordered item lead times vary and are based on current production backlogs and existing open orders. After receipt of order you will be contacted with a shipping timeline.