Teledyne FLIR BFS-PGE-200S7C-C
Teledyne FLIR BFS-PGE-200S7C-C 20 MP, 6 FPS, Sony IMX541, Color Camera
Blackfly S GigE cameras featuring Lossless Compression (LLC) are designed to deliver higher maximum frame rates and lower data transmission over the link, without compromising on image quality. With both automatic and precise manual control over image capture and on-camera preprocessing, the Blackfly S accelerates application development.
Features:
THE LATEST CMOS SENSORS
Switch between high sensitivity and low noise, or high saturation capacity and dynamic range with selectable conversion gain.
IMPROVE CYCLE TIMES & OUTPUT
Automate more with advanced camera controls, event notifications, chunk data, and counters and timers. Increase system output without compromising quality using our Lossless Compression (LLC) feature.
ACCELERATE YOUR TIME TO MARKET
FLIR’s GenICam3 API with GUI library, and detailed event logging is supported by comprehensive documentation.
- Part Number
- BFS-PGE-200S7C-C
- Resolution
- 4504 x 4504
- Megapixels
- 20
- Max Frame Rate Standard
- 6
- Max Frame Rate Turbodrive/Lossless Compression
- 13
- Sensor Model
- Sony IMX541
- Pixel Size
- 2.74
- Sensor Type
- CMOS
- Sensor Format
- 1.1"
- Shutter type
- Global shutter
- Spectrum
- Color
- Optical Filter
- IR-Cut Off (670 nm)
- Lens Mount
- C-mount
- Synchronization
- Software trigger, hardware trigger, action command, PTP
- Data Interface
- Gigabit Ethernet 1 Gbps
Features
- Acquisition Modes
- Continuous / Single Frame / Multi Frame
- Exposure Control
- Hardware trigger, programmable via camera API, automatic
- Exposure Range
- 27 µs to 30 seconds
- Flash Memory
- 6 MB non-volatile memory
- Gain Control
- Manual, automatic (AGC)
- Image Buffer
- 240 MB
- Image Processing
- Color correction matrix, gamma, lookup table, saturation, and sharpness
- Partial Image Modes
- Pixel binning, decimation, ROI
- User Sets
- 2 user configuration sets for custom camera settings
- White Balance
- Manual, automatic (AWB)
Performance
- Absolute Sensitivity Threshold (y)
- 5.28
- Dynamic Range dB
- 70.83
- Gain Range
- 0 dB to 47 dB
- QE Blue
- 45.94 @470 nm
- QE Green
- 52.58 @525 nm
- QE Red
- 34.15 @630 nm
- Saturation Capacity (e-)
- 9645
- Temporal Dark Noise (Read Noise)
- 2.27
Physical
- Auxiliary Output
- 3.3 V, 120 mA maximum
- Connector
- RJ45 (horizontal locking) | Hirose HR10A-7R-6PB
- Digitization Bit Depth (ADC)
- 8-bit, 10-bit, 12-bit
- Dimensions [W x H x L]
- 29 mm × 29 mm × 39 mm
- Mass
- 53 g
- Non-Isolated I/O Ports
- 1 bi-directional, 1 input
- Operating Humidity
- 20 to 80% (no condensation)
- Operating Temperature
- 0° to 50°C (ambient)
- Opto-isolated I/O Ports
- 1 input, 1 output
- Power Consumption [Maximum]
- 4.2 W
- Power Requirements
- Power over Ethernet (PoE), or 12 V nominal (8 - 24 V) via GPIO
- Serial Port
- Supported
- Storage Humidity
- 30 to 95% (no condensation)
- Storage Temperature
- -30° to 60°C
Teledyne FLIR BFS-PGE-200S7C-C 20 MP, 6 FPS, Sony IMX541, Color Camera
Blackfly S GigE cameras featuring Lossless Compression (LLC) are designed to deliver higher maximum frame rates and lower data transmission over the link, without compromising on image quality. With both automatic and precise manual control over image capture and on-camera preprocessing, the Blackfly S accelerates application development.
Features:
THE LATEST CMOS SENSORS
Switch between high sensitivity and low noise, or high saturation capacity and dynamic range with selectable conversion gain.
IMPROVE CYCLE TIMES & OUTPUT
Automate more with advanced camera controls, event notifications, chunk data, and counters and timers. Increase system output without compromising quality using our Lossless Compression (LLC) feature.
ACCELERATE YOUR TIME TO MARKET
FLIR’s GenICam3 API with GUI library, and detailed event logging is supported by comprehensive documentation.
- Part Number
- BFS-PGE-200S7C-C
- Resolution
- 4504 x 4504
- Megapixels
- 20
- Max Frame Rate Standard
- 6
- Max Frame Rate Turbodrive/Lossless Compression
- 13
- Sensor Model
- Sony IMX541
- Pixel Size
- 2.74
- Sensor Type
- CMOS
- Sensor Format
- 1.1"
- Shutter type
- Global shutter
- Spectrum
- Color
- Optical Filter
- IR-Cut Off (670 nm)
- Lens Mount
- C-mount
- Synchronization
- Software trigger, hardware trigger, action command, PTP
- Data Interface
- Gigabit Ethernet 1 Gbps
Features
- Acquisition Modes
- Continuous / Single Frame / Multi Frame
- Exposure Control
- Hardware trigger, programmable via camera API, automatic
- Exposure Range
- 27 µs to 30 seconds
- Flash Memory
- 6 MB non-volatile memory
- Gain Control
- Manual, automatic (AGC)
- Image Buffer
- 240 MB
- Image Processing
- Color correction matrix, gamma, lookup table, saturation, and sharpness
- Partial Image Modes
- Pixel binning, decimation, ROI
- User Sets
- 2 user configuration sets for custom camera settings
- White Balance
- Manual, automatic (AWB)
Performance
- Absolute Sensitivity Threshold (y)
- 5.28
- Dynamic Range dB
- 70.83
- Gain Range
- 0 dB to 47 dB
- QE Blue
- 45.94 @470 nm
- QE Green
- 52.58 @525 nm
- QE Red
- 34.15 @630 nm
- Saturation Capacity (e-)
- 9645
- Temporal Dark Noise (Read Noise)
- 2.27
Physical
- Auxiliary Output
- 3.3 V, 120 mA maximum
- Connector
- RJ45 (horizontal locking) | Hirose HR10A-7R-6PB
- Digitization Bit Depth (ADC)
- 8-bit, 10-bit, 12-bit
- Dimensions [W x H x L]
- 29 mm × 29 mm × 39 mm
- Mass
- 53 g
- Non-Isolated I/O Ports
- 1 bi-directional, 1 input
- Operating Humidity
- 20 to 80% (no condensation)
- Operating Temperature
- 0° to 50°C (ambient)
- Opto-isolated I/O Ports
- 1 input, 1 output
- Power Consumption [Maximum]
- 4.2 W
- Power Requirements
- Power over Ethernet (PoE), or 12 V nominal (8 - 24 V) via GPIO
- Serial Port
- Supported
- Storage Humidity
- 30 to 95% (no condensation)
- Storage Temperature
- -30° to 60°C
| Vendor: | |
|---|---|
| SKU: |
BFS-PGE-200S7C-C |
| Weight: |
1.0 lb |
Lead time varies by product. Standard non-back-order items ship within 1-7 days. Items in stock at our Sacramento warehouse ship same day. Back-ordered item lead times vary and are based on current production backlogs and existing open orders. After receipt of order you will be contacted with a shipping timeline.