Teledyne FLIR BFS-U3-04S2C-CS
Teledyne FLIR BFS-U3-04S2C-CS 0.4 MP, 522 FPS, Sony IMX287, Color
The Exact Images You Need
Choice of CMOS global shutter, polarization, and high-sensitivity BSI sensors. Color transformation tools ensure true- to-life color. Advanced auto-algorithms or precise manual control
Develop Once, Deploy Anywhere
Support for a wide range of operating systems and host system hardware architectures. Easily switch to board level models for embedded systems. Simplified product iteration with consistent form factor across sensor sizes
Accelerate Application Development
Compatible with third party software and hardware. Less code-writing required using powerful on-camera features. Quickly build custom applications with rich sample code and descriptive API logging.
- Part Number
- BFS-U3-04S2C-C
- Resolution
- 720 x 540
- Megapixels
- 0.4
- Max Frame Rate Standard
- 522
- Sensor Model
- Sony IMX287
- Pixel Size
- 6.9
- Sensor Type
- CMOS
- Sensor Format
- 1/2.9"
- Shutter type
- Global shutter
- Spectrum
- Color
- Optical Filter
- IR-Cut Off (670 nm)
- Lens Mount
- C-mount
- Synchronization
- Software trigger, hardware trigger, action command
- Data Interface
- USB 3.1 Gen 1
Features
- Acquisition Modes
- Continuous / Single Frame / Multi Frame
- Exposure Control
- Hardware trigger, programmable via camera API, automatic
- Exposure Range
- 4 µs to 30 seconds
- Flash Memory
- 6 MB non-volatile memory
- Gain Control
- Manual, automatic (AGC)
- Image Buffer
- 240 MB
- Image Processing
- Color correction matrix, gamma, lookup table, saturation, and sharpness
- Partial Image Modes
- Pixel binning, decimation, ROI
- User Sets
- 2 user configuration sets for custom camera settings
- White Balance
- Manual, automatic (AWB)
Performance
- Absolute Sensitivity Threshold (y)
- 7.55
- Dynamic Range dB
- 74.35
- Gain Range
- 0 db to 47 dB
- QE Blue
- 49.86 @460 nm
- QE Green
- 56.96 @530 nm
- QE Red
- 45.11 @625 nm
- Saturation Capacity (e-)
- 22436
- Temporal Dark Noise (Read Noise)
- 3.80
Physical
- Auxiliary Output
- 3.3 V, 120 mA maximum
- Connector
- USB3 Micro-B | Hirose HR10A-7R-6PB
- Digitization Bit Depth (ADC)
- 8-bit, 10-bit, 12-bit
- Dimensions [W x H x L]
- 29 mm × 29 mm × 30 mm
- Mass
- 36 g
- Non-Isolated I/O Ports
- 1 bi-directional, 1 input
- Operating Humidity
- 20 to 80% (no condensation)
- Operating Temperature
- 0° to 50°C (ambient)
- Opto-isolated I/O Ports
- 1 input, 1 output
- Power Consumption [Maximum]
- 3 W
- Power Requirements
- 8-24 V via GPIO or 5 V via USB3
- Serial Port
- Supported
- Storage Humidity
- 30 to 95% (no condensation)
- Storage Temperature
- -30° to 60°C
Teledyne FLIR BFS-U3-04S2C-CS 0.4 MP, 522 FPS, Sony IMX287, Color
The Exact Images You Need
Choice of CMOS global shutter, polarization, and high-sensitivity BSI sensors. Color transformation tools ensure true- to-life color. Advanced auto-algorithms or precise manual control
Develop Once, Deploy Anywhere
Support for a wide range of operating systems and host system hardware architectures. Easily switch to board level models for embedded systems. Simplified product iteration with consistent form factor across sensor sizes
Accelerate Application Development
Compatible with third party software and hardware. Less code-writing required using powerful on-camera features. Quickly build custom applications with rich sample code and descriptive API logging.
- Part Number
- BFS-U3-04S2C-C
- Resolution
- 720 x 540
- Megapixels
- 0.4
- Max Frame Rate Standard
- 522
- Sensor Model
- Sony IMX287
- Pixel Size
- 6.9
- Sensor Type
- CMOS
- Sensor Format
- 1/2.9"
- Shutter type
- Global shutter
- Spectrum
- Color
- Optical Filter
- IR-Cut Off (670 nm)
- Lens Mount
- C-mount
- Synchronization
- Software trigger, hardware trigger, action command
- Data Interface
- USB 3.1 Gen 1
Features
- Acquisition Modes
- Continuous / Single Frame / Multi Frame
- Exposure Control
- Hardware trigger, programmable via camera API, automatic
- Exposure Range
- 4 µs to 30 seconds
- Flash Memory
- 6 MB non-volatile memory
- Gain Control
- Manual, automatic (AGC)
- Image Buffer
- 240 MB
- Image Processing
- Color correction matrix, gamma, lookup table, saturation, and sharpness
- Partial Image Modes
- Pixel binning, decimation, ROI
- User Sets
- 2 user configuration sets for custom camera settings
- White Balance
- Manual, automatic (AWB)
Performance
- Absolute Sensitivity Threshold (y)
- 7.55
- Dynamic Range dB
- 74.35
- Gain Range
- 0 db to 47 dB
- QE Blue
- 49.86 @460 nm
- QE Green
- 56.96 @530 nm
- QE Red
- 45.11 @625 nm
- Saturation Capacity (e-)
- 22436
- Temporal Dark Noise (Read Noise)
- 3.80
Physical
- Auxiliary Output
- 3.3 V, 120 mA maximum
- Connector
- USB3 Micro-B | Hirose HR10A-7R-6PB
- Digitization Bit Depth (ADC)
- 8-bit, 10-bit, 12-bit
- Dimensions [W x H x L]
- 29 mm × 29 mm × 30 mm
- Mass
- 36 g
- Non-Isolated I/O Ports
- 1 bi-directional, 1 input
- Operating Humidity
- 20 to 80% (no condensation)
- Operating Temperature
- 0° to 50°C (ambient)
- Opto-isolated I/O Ports
- 1 input, 1 output
- Power Consumption [Maximum]
- 3 W
- Power Requirements
- 8-24 V via GPIO or 5 V via USB3
- Serial Port
- Supported
- Storage Humidity
- 30 to 95% (no condensation)
- Storage Temperature
- -30° to 60°C
| Type: | |
|---|---|
| Vendor: | |
| SKU: |
BFS-U3-04S2C-CS |
| Weight: |
1.0 lb |
Lead time varies by product. Standard non-back-order items ship within 1-7 days. Items in stock at our Sacramento warehouse ship same day. Back-ordered item lead times vary and are based on current production backlogs and existing open orders. After receipt of order you will be contacted with a shipping timeline.