Teledyne FLIR ORX-10G-71S7M-C
Teledyne FLIR ORX-10G-71S7M-C 7.1 MP, 112 FPS, Sony IMX420, Monochrome Camera
- Part Number
- ORX-10G-71S7M-C
- Resolution
- 3208 × 2200
- Megapixels
- 7.1
- Max Frame Rate Standard
- 112
- Sensor Model
- Sony IMX420
- Pixel Size
- 4.5
- Sensor Type
- CMOS
- Sensor Format
- 1.1"
- Shutter type
- Global shutter
- Spectrum
- Mono
- Optical Filter
- None
- Lens Mount
- C-mount
- Synchronization
- Software trigger, hardware trigger, action command
- Data Interface
- Gigabit Ethernet 10 Gbps / 1 Gbps
Features
- Acquisition Modes
- Continuous / Single Frame / Multi Frame
- Exposure Control
- Hardware trigger, programmable via camera API, automatic
- Exposure Range
- 10 µs to 30 seconds
- Flash Memory
- 4 MB non-volatile memory
- Gain Control
- Manual, automatic (AGC)
- Image Buffer
- 240 MB
- Image Processing
- Gamma, lookup table, pixel correction, target grey value, and sharpness
- Partial Image Modes
- Pixel binning, decimation, ROI
- User Sets
- 2 user configuration sets for custom camera settings
Performance
- Absolute Sensitivity Threshold (y)
- 4.74 (HCG) / 9.42 (LCG)
- Dynamic Range dB
- 70.59 (HCG) / 71.74 (LCG)
- Gain Range
- 0 db to 47 dB
- QE (Mono)
- 67 (HCG) / 68 (LCG) @530 nm
- Saturation Capacity (e-)
- 10692 (HCG) / 24802 (LCG)
- Temporal Dark Noise (Read Noise)
- 2.66 (HCG) / 5.92 (LCG)
Physical
- Auxiliary Output
- 3.3 V, 120 mA maximum
- Connector
- RJ45 (horizontal locking) | Hirose HR10A-10R-12SB
- Digitization Bit Depth (ADC)
- 8-bit, 10-bit, 12-bit
- Dimensions [W x H x L]
- 60 mm × 60 mm × 100 mm
- Mass
- 500 g
- Non-Isolated I/O Ports
- 2 bi-directional
- Operating Humidity
- 20 to 80% (no condensation)
- Operating Temperature
- 0° to 50°C (ambient)
- Opto-isolated I/O Ports
- 2 input, 2 output
- Power Consumption [Maximum]
- 13.6 W (13.2 W nominal); GPIO power only
- Power Requirements
- 12-24 V, via GPIO interface
- Serial Port
- 1 (over non-isolated I/O)
- Storage Humidity
- 20 to 95% (no condensation)
- Storage Temperature
- -30° to 60°C
Categories:
Teledyne FLIR ORX-10G-71S7M-C 7.1 MP, 112 FPS, Sony IMX420, Monochrome Camera
- Part Number
- ORX-10G-71S7M-C
- Resolution
- 3208 × 2200
- Megapixels
- 7.1
- Max Frame Rate Standard
- 112
- Sensor Model
- Sony IMX420
- Pixel Size
- 4.5
- Sensor Type
- CMOS
- Sensor Format
- 1.1"
- Shutter type
- Global shutter
- Spectrum
- Mono
- Optical Filter
- None
- Lens Mount
- C-mount
- Synchronization
- Software trigger, hardware trigger, action command
- Data Interface
- Gigabit Ethernet 10 Gbps / 1 Gbps
Features
- Acquisition Modes
- Continuous / Single Frame / Multi Frame
- Exposure Control
- Hardware trigger, programmable via camera API, automatic
- Exposure Range
- 10 µs to 30 seconds
- Flash Memory
- 4 MB non-volatile memory
- Gain Control
- Manual, automatic (AGC)
- Image Buffer
- 240 MB
- Image Processing
- Gamma, lookup table, pixel correction, target grey value, and sharpness
- Partial Image Modes
- Pixel binning, decimation, ROI
- User Sets
- 2 user configuration sets for custom camera settings
Performance
- Absolute Sensitivity Threshold (y)
- 4.74 (HCG) / 9.42 (LCG)
- Dynamic Range dB
- 70.59 (HCG) / 71.74 (LCG)
- Gain Range
- 0 db to 47 dB
- QE (Mono)
- 67 (HCG) / 68 (LCG) @530 nm
- Saturation Capacity (e-)
- 10692 (HCG) / 24802 (LCG)
- Temporal Dark Noise (Read Noise)
- 2.66 (HCG) / 5.92 (LCG)
Physical
- Auxiliary Output
- 3.3 V, 120 mA maximum
- Connector
- RJ45 (horizontal locking) | Hirose HR10A-10R-12SB
- Digitization Bit Depth (ADC)
- 8-bit, 10-bit, 12-bit
- Dimensions [W x H x L]
- 60 mm × 60 mm × 100 mm
- Mass
- 500 g
- Non-Isolated I/O Ports
- 2 bi-directional
- Operating Humidity
- 20 to 80% (no condensation)
- Operating Temperature
- 0° to 50°C (ambient)
- Opto-isolated I/O Ports
- 2 input, 2 output
- Power Consumption [Maximum]
- 13.6 W (13.2 W nominal); GPIO power only
- Power Requirements
- 12-24 V, via GPIO interface
- Serial Port
- 1 (over non-isolated I/O)
- Storage Humidity
- 20 to 95% (no condensation)
- Storage Temperature
- -30° to 60°C
| Vendor: | |
|---|---|
| SKU: |
ORX-10G-71S7M-C |
| Weight: |
1.0 lb |
Lead time varies by product. Standard non-back-order items ship within 1-7 days. Items in stock at our Sacramento warehouse ship same day. Back-ordered item lead times vary and are based on current production backlogs and existing open orders. After receipt of order you will be contacted with a shipping timeline.